Ice Dams

We do Ice Dam and Roof Snow removal in Bedford and Lexington Ma. An ice dam is a problem of house and building maintenance in cold climates. An ice dam can occur when snow accumulates on the slanted roof of a house with inadequate insulation and warm air leaks into the attic at penetrations for plumbing stacks, wiring, chimneys, attic hatches, recessed lights, etc. These warm air leaks are known as attic bypasses. Heat conducted through the insufficient insulation and warm air from the attic bypasses warms the roof and melts the snow. Meltwater flows down the roof, under the blanket of snow, onto the eave and into the gutter, where colder conditions on the overhang cause it to freeze. Eventually, ice accumulates along the eave and in the gutter. Snow that melts later cannot drain properly through the ice on the eave and in the gutter. This can result in:

* Leaking roof (height of leak depends on extent of ice dam).
* Wet, ineffective insulation.
* Stained or cracked plaster or drywall.
* Rotting timber.
* Stained, blistered or peeling paint.

Under extreme conditions, with heavy snow and severe cold, almost any house can have an ice dam, whereas a house that is poorly insulated with attic bypasses will have ice dams during a normal winter weather. Giant icicles hanging from the eave are one indication of a poorly insulated attic with many attic bypasses.

When snow accumulates on a roof, a cycle of melting and refreezing occurs. In a perfect world, the snow would melt off the roof, enter the gutters, and flow harmlessly to the ground. It takes very little actual moisture to form ice dams. Proper attic ventilation is also a factor, if cold air is allowed to pass in through an eave vent and up along the entire underside of the roof deck, the outside surface of the roof may maintain a below-freezing temperature. Possible causes of inadequate ventilation can be improper roof system design (not enough ventilation or improperly installed ventilation) and/or improperly installed insulation that is covering the eave vents.